Explore Our Products

Defelsko - Environmental Gages

You May Also Like

If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Defelsko Oven Temperature Logger - PosiTest OTL

Oven Temperature Logger
Measures and records oven temperature profiles
Measures and records up to 40,000 datasets (240,000 readings) into 6 independent batches
High temperature stainless steel barrier box with fiberglass insulation for long run times at high temperatures. Contains no silicone.
6 K-type thermocouple ports (channels)
Download, view, and analyze batch data using PosiSoft Desktop Software. Export .CSV files for easy import into spreadsheets.
Wide variety of probes available with 1.8 or 3.6 m (6' or 12') stainless steel braided cables (sold separately
Thermocouple Measurement Range -100 to 1000°C / -148 to 1832°F


Measure conditions :
Relative humidity, air temperature, surface temperature, dew point temperature
and difference between surface and dew point temperature.
Large , easy to read, graphics LCD
Audio and visual alarm - indicates when climate conditions are unsuitable for painting.

Defelsko DPML Dew Point Meter Logger

Dew Point Meter Logger (Positector)
Magnetic probe attaches to steel structures for monitoring climatic conditions.

Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, difference between surface and dew point temperatures, and wet bulb temperature.
Fast response, precision sensors provide accurate, repeatable readings
Environmentally sealed enclosure – weatherproof, dustproof, and shockproof — meets or exceeds IP65
Internal memory storage of 10,000 datasets (60,000 readings)

Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32

Defelsko Concrete Moisture Meter - PosiTest CMM

Non-destructively measures the moisture
content of concrete in accordance with
ASTM F2659
Standard Test Method for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement, and Other
Floor Slabs and Screeds. Using a Non-Destructive
Electronic Moisture Meter

Defelsko Concrete Moisture Meter - In Situ (CMM)

Concrete Moisture Meter - In Situ
Measure Relative Humidity and Temperature in Concrete Floor Slabs

The PosiTector CMM IS probes and free mobile app guides users through the ASTM F2170 documentation criteria. View and record readings directly with your Apple or Android smart device or PosiTector DPM Advanced gage
Easily collect and report relative humidity and temperature in concrete floor slabs in conformance with ASTM F2170
No need to open the hole or remove the cap. Probes remain powered on and broadcasting via Bluetooth while in situ for up to three weeks.
Reusable Smart Probes
Fast response precision sensors provide accurate, repeatable readings
Fast acclimation, reduced testing time
Combined sleeve and probe design simplifies the installation process and does not require consumables


Conductivity probe specifically designed for ISO 8502-6,9
Displays test duration, sample temperature, conductivity (μS/cm) and
surface density (mg/m2 or μg/cm2)
Onscreen interface guides users through the Bresle test method
Automatic storage of a background (blank) measurement — handy when
performing multiple tests
Solvent, acid, oil, water and dust resistant—weatherproof
Shock-absorbing, protective rubber holster with belt clip
Two year warranty on gage body AND probe
Long Form Certificate of Calibration showing traceability to NIST included
Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included.
Automatic temperature normalization and sample temperature reporting
Conforms to national and international standards including ISO, NACE, SSPC,IMO and US Navy

Defelsko Gloss Meter - ProsiTector GLS

Gloss Meter - PosiTector GLS
Portable Gloss Measurement for all surface finishes
Conforms to National and International standards including ISO and ASTM
Geometries models (60°) or (20° & 60°) or (20°,60°,85°)
Haze surfaces measure enable for models
(20° & 60°) or (20°,60°,85°) only
Measurement Unit: GU (Gloss) and % (Reflectance)
Multi-purpose Body for all probes

Defelsko PosiTest AT Verifier (Calibrator for AT series)

Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house
quality control requirements.
Connect the adhesion tester’s pull-off actuator to the PosiTest AT
Verifier’s loading fixture. Apply pressure using the adhesion tester’s
normal operating procedure. Compare values from the adhesion tester
and the Verification Device.

Defelsko PosiTest DFT

Fast, repeatable measurements — 60+ readings per minute
Ready to measure—no adjustment required for most applications
Zero or 1 Point Calibration Adjustment for complex applications
Onscreen averaging for up to 99 readings
Strong, wear-resistant, ruby-tipped probe
V-groove in probe for positioning on cylindrical parts
High contrast color display
Adjustable display brightness for optimal visibility in any environment
Auto rotating display with lock to prevent unintended rotations Simple, icon based menu
Handy RESET feature when no zero reference is available
Mils/microns switchable
Built-in wrist strap for added convenience and safety

Defelsko Automatic Pull-Off Adhesion Tester AT-A

PosiTest AT-A Automatic Wirelessly connect the PosiTest AT-A to your smart device using our free app Impact and scratch resistant
color touch screen with keypad for operation with or without gloves
Electronically controlled hydraulic pump automatically applies
smooth and continuous pull-off pressure. Greatly reduces user
effort and the risk of influencing the pulling process.
Impact and scratch resistant color touch screen with keypad for
operation with or without gloves
 User adjustable pull rate, pull limit and hold time
 Rotating display for horizontal and vertical use
 Built-in rechargeable battery performs over 200 tests per charge.
Continue testing with AC power while the battery recharges.
 Internal memory stores maximum pull-off pressure, rate of
pull, test duration, dolly size, pass/fail, the nature of fracture
and user notes for 100,000 pulls in up to 1,000 batches
 Compatible with PosiSoft desktop software, PosiSoft.net
and PosiTector App
 PosiSoft USB Drive - stored readings and graphs can be
accessed using universal PC/Mac web browsers or file explorers.
No software required.
 WiFi technology wirelessly communicates with PosiSoft.net and
downloads software updates and allows access to stored
measurement data using web browsers
 Rubberized, shock absorbing grips also provide a stable,
skid-resistant footing


Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
Available in Automatic or Manual models
Hydraulic pump apply smooth and continuous pull off pressure.
Model : DFATA20A-B


Barcol Hardness Impressor
Applications : Soft metals such as aluminum, aluminum alloys,
copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic.
Conforms to ASTM B648/D2583, DIN EN 59 and AS/NZS 3572.22

Defelsko Electronic Surface Profile Gage for Blasted Steel and Textured Coatings

Measures peak height (HL)
Automatically subtracts the 50.8μm (2 mil)incompressible film from all readings
Range : 20–115μm (0. 8–4.5 mils)

Defelsko Powder Coating Checker

Non-contact coating thickness gage measures uncured powder and predicts cured thickness.
Range : 20 – 100 μm (0.8–4.0 mils)
Resolution : 1 μm (0.1 mil)