Imada - Push & Pull Gages

- Ideal for hand-held use due to the hand fitting design & lightweight
- Easy data management and OK judgement
- Capacity up to 1000N
- Upgraded design to prevent load cell overloading
- DST series can switch real time to peak hold measurement. It equips OK judgement or reversible indication function.
- DSV series is an advanced model equipment with tilt-sensing function and internal memory (1000) function.

Measure Push & Pull force
Range : 2N - 1000N , 200gf -100kgf or in Lbf
Accuracy : +/- 0.2% F.S.
Sampling Rate : 1000 times / second
Overload Capacity : 200% of the F.S.

Measure Push & Pull force
Range : 2N - 5000N , 200gf -500kgf or in Lbf
Accuracy : +/- 0.2% F.S.
Sampling Rate : 2000 times / second
Overload Capacity : 200% of the F.S.
Output Function : USB, RS232, etc.

Testing Torque Force (Twisting)
Measure torque force 0.5N-10N
Accuracy +/-0.5% F.S.
200% Overloading Prevention

Peak force hold on all models
Avaliabe unit N, Kg or Lb
Range : 1000N - 5000N
Accuracy : +/- 0.2% F.S.
Sampling Rate : 2000 times / second
Overload Capacity : 200% of the F.S.

Peak forces are captured by the peak-hold function equipped on all models
Zero adjustment function for tare weight allows the weight of attachments to be compensated.

Full range of loadcell selection.

Push & Pull Scale
Peak force hold on all models
Zero adjustment for tare weight
Avaliabe unit N, Kg or Lb
Range : 10N - 500N

Interchanged Loadcell without an adjustment
Accuracy : +/- 0.2% F.S.
Sampling Rate : 2000 times / second
Selectable list of loadcell sensor

Designed for tack test of adhesives such as adhesive plaster
Complies with a part of ASTM Standard

This attachment is designed for compression test of syringe.
It handles syringes in capacity from 0.5 up to 50ml.
It enables compression test according to a part of ISO 7886-1:2017.

Able to draw force-displacement curve
Switchable N, Kgf, Lbf
Maximum Capacity 2500N / 250kgf
Stroke limit, Overload prevent & Force Control
PC is optional

Regulated rotation speed for better accuracy.
A variety of measuring capabilities such as torque control functions and torque angle measurements.
Range of clamp / sample holder attachments to suit many sizes, shapes and materials.

Designed to evaluate the force of pulling out the needle apart from the hub
Enables to test the needles of diameter from 0.3 to 2.0mm
Complies with a part of JIS and ISO Standards

IPTS-5N Complying with IEC60286-3:2013
Designed exclusively for peel test of embossed career tape.
Packaging of component for automatic handling
Packaging of surface mount components on continues tape
Easy sample setting and simple operation
Accessory software graphs the measurement accurately due to its high sampling rate. Max.2000Hz.

MH2-500N / MH2-2500N
- High repeatability with constant testing speed and direction
- The horizontal design for easy sample setting
- Simple digital setting of testing modes and speed
- Various functions with force gauge
Easy Operation
- Inclined control panel for easy operation
- Easy dial operation for digital value
- Three testing modes to meet testing requirements

Ideal for safety test of wire connectors
Break and Keep mode is available
Capacity : 1000N / 1N
Safe overload 150% F.S.
Measuring speed control
Maximum stroke 50mm
Maximum sample length 100mm or more