Explore Our Products

Mitutoyo - Caliper



You May Also Like



If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Mitutoyo Technical Consultancy & Collaborate Calibration Services

We conduct assessment of the needs for the training before making any arrangement. Our aim is to help customers develop a good habit of handling equipment and understand the background application in order to receive the highest standard of quality.

• Our Calibration services, in-house standard operational procedure and ISO/IEC 17025:2005 accredited laboratory are endorsed by our principal manufacturers. . We collaborate services to approved accredited laboratory to ensure quality performance.
• Our TSD works hand-in-glove with Mitutoyo Asia Pacific accredited laboratory in providing services in their in-house laboratory and on-site calibration since 2008 in Singapore. We invest in overseas on-the-job training at manufacturer factory to better understand their equipment and instruments to service our customers.
• Our technical services include: conducting application training, repair, consultation and assessment of product condition.

ENQUIRY
Mitutoyo BACK JAW CENTERLINE CALIPER

Specially designed to measure hole center to center
and edge to center distance

ENQUIRY
Mitutoyo BLADE CALIPER

Thw thin blade type jaws fit into very small grooves
and make measurement easier to obtain.

ENQUIRY
Mitutoyo CARBON FIBER CALIPER

Light weight caliper that employ CFRP (Carbon Fiber Reinforced Plastic) in the beam and jaw
Available range 450mm to 2000mm / 18" to 80"

ENQUIRY
Mitutoyo CARBON FIBER CALIPER LONG JAW TYPE

Light weight caliper that employ CFRP (Carbon Fiber Reinforced Plastic) in the beam and jaw
Available range 450mm to 2000mm / 18" to 80"

ENQUIRY
Mitutoyo COOLANT PROOF CALIPER

Dust / Water protection conforming IP67

ENQUIRY
Mitutoyo DIAL CALIPER

"New" High shock protection
Easy to read dial face

ENQUIRY
Mitutoyo DIAL CALIPER GAGE

Versatile OD measuring gages for groove thickness, tube thickness and hard to reach dimensions.

ENQUIRY
Mitutoyo DIGIMATIC CALIPER

Exclusive encoder technology
Large and clear LCD readout
Available range 0-300mm / 12"

ENQUIRY
Mitutoyo "New" PJ-Plus Profile Projector

The Mitutoyo PJ-Plus is a new series of profile projectors that utilize LED lighting and provides reliable measurements in manufacturing site environments.
PJ-Plus Summary
• LED illumination
• Stepless illumination adjustment
• Improved durability
• Intuitive operation
• Built-in digital XY counter
• Available with M2 or QM-Data 2D processor

ENQUIRY
Mitutoyo HEIGHT GAGE - QM HEIGHT

High-Performance Height Gage - QM-Height Series

Best-in-class accuracy ±(2,4+2,1L/600)μm
• Built-in air-suspension feature using an internal pump enables smooth movement over a surface plate.
(Lower-cost version without air suspension also available)
• Easy-to-view, simple control panel enables most measurements to be made with a single keystroke.
• Eco-friendly product, operable for approximately 1200 hours with four AA alkaline batteries.
(Four commercially available nickel hydride batteries can also be used.)
• By installing the U-WAVE-T measurement data wireless communication system or USB communication
driver in your PC, the optional functions that enhance operability, including output of measurement data
to your PC, become available.
The USB communication driver can be downloaded from the Mitutoyo website. (Communication software is separately
required.): https://mitutoyo.eu/en_us/downloads/software-and-updates
“d2” is a generic term given to Digimatic output that supports up
to eight input/output digits. ID measurement & OD measurement

ENQUIRY
Mitutoyo "BEST" SURFACE ROUGHNESS TESTER - SJ-210

Portable hand-held model
Wide range of parameter example Ra, Ry, Rz, Rmax.etc
Color Graphic display
Built-in memory for data storage
Skidded styles measurement

ENQUIRY
Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009

ENQUIRY
Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

ENQUIRY
Mitutoyo PROFILE PROJECTORS - PJ-H30

Digital axis Counter and Projector readout counter
to facilitate dimensional and angular measurement
3 lens turret model with 10X standard magnification
Optional 5X, 20X, 50X & 100X lens
High accuracy stage

ENQUIRY
Mitutoyo Bluetooth U-Wave Data Communication System

Data Collection using Bluetooth communication System.
Link Smartphone, Tablet and Computer for Data Measurement Management.
Bluetooth communication not only allows for cost reduction, as it does not require the conventional dedicated receiver unit, but it also improves operability.
U-WAVEPAK-BM :
Available for both Android and IOS, U-WAVEPAK-BM provides users to make use of simple process control with its measurement data import function.
U-WAVEPAK NAVI :
Available only for Android U-WAVEPAK NAVI guides you throughout your measurement. By using pictures, the app tells you where and how to measure as well as in what order or what device to use.
U-WAVEPAK-BW :
For use on computers, U-WAVEPAK-BW communicates directly with your measuring instrument, allowing you to transfer measurement data to your computer’s software. This software can be downloaded for free on our company’s website.

ENQUIRY
Mitutoyo CMM Fixtures

Mitutoyo offers you the full range of CMM equipment from the machine itself to probe systems, software up to clamping systems.

The Fixture series “eco-fix” offer you:
a quick, easy & flexible way to create fixtures,
practice-oriented modular concept,
time and cost-saving way to buit fixtures,
easy adaption of product changes to the fixtures,
leight-weight aluminium parts,
strong, hardcoated and anodised parts for long life under rough conditions.

ENQUIRY
365bet平台