Explore Our Products

Mitutoyo - Hardness Tester



You May Also Like



If you need any assistance, do not hesitate to contact us!

Contact us

Or you can call us directly at +65 6295 2288.

Mitutoyo HARDMATIC -HH300

Durometer for sponge, rubber and plastics
According to shore A, Shore D & Shore E

ENQUIRY
Mitutoyo HARDMATIC - HH-411

Portable hardness tester rebound Type
Hardness Scale HV, HRB, HRC, HB, HS amd Mpa
Alkaline Battery operated

ENQUIRY
Mitutoyo HARDNESS TESTER MACHINES - HM-200 MICRO-VICKERS

Wide application testing metals, especially small heat treated parts tested with light load
A clear natural view of indentation is achieved by changing light sourceof illumination
Loading mechanism enables the test force to be freely selected

ENQUIRY
Mitutoyo HARDNESS TESTER MACHINES - HR ROCKWELL

Rockwell or Rockwell Superficial avaliable

ENQUIRY
Mitutoyo HARDNESS TESTER MACHINES - HV VICKERS

Wide application testing metals, especially small heat treated parts
A clear natural view of indentation is achieved by changing light sourceof illumination
Full raneg of load selection

ENQUIRY
Mitutoyo HARDNESS TESTER MACHINES -HR-500 WIZHARD

Rockwell & Rockwell Superficial Type
The hardness of even the inside wall of pipe shaped specimen ca be tested

ENQUIRY
Mitutoyo Crysta-Apex S 500/700/900/1200 - Standard CNC CMM

High accuracy in the 1.7μm class
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
*ISO 10360-2:2009

ENQUIRY
Mitutoyo MACH-3A 653 Series 360 In-line Type CNC CMM

CNC CMM (Horizontal type) incorporating the CMM controller and the host computer in the main unit results in a compact spacing saving footprint for the shop floor. This series is designed for 24 hour operation resulting in stable operation and remarkable durability.
Range X-23.62" (600mm), Y-19.68" (500mm) & Z-11.02" (280mm)

ENQUIRY
Mitutoyo "BEST" SURFACE ROUGHNESS TESTER - SJ-210

Portable hand-held model
Wide range of parameter example Ra, Ry, Rz, Rmax.etc
Color Graphic display
Built-in memory for data storage
Skidded styles measurement

ENQUIRY
Mitutoyo PROFILE PROJECTORS - PJ-H30

Digital axis Counter and Projector readout counter
to facilitate dimensional and angular measurement
3 lens turret model with 10X standard magnification
Optional 5X, 20X, 50X & 100X lens
High accuracy stage

ENQUIRY
Mitutoyo CMM Fixtures

Mitutoyo offers you the full range of CMM equipment from the machine itself to probe systems, software up to clamping systems.

The Fixture series “eco-fix” offer you:
a quick, easy & flexible way to create fixtures,
practice-oriented modular concept,
time and cost-saving way to buit fixtures,
easy adaption of product changes to the fixtures,
leight-weight aluminium parts,
strong, hardcoated and anodised parts for long life under rough conditions.

ENQUIRY
Mitutoyo CRYSTA - Apex EX Series

5 axis capability creates an amazing new standard for measurement excellence. 5-axis design offers a choice of highly productive measurement methods, including “head touch” for point measurement by moving the probe head only in two axes, and high speed 5-axis touch trigger scanning.
The CRYSTA-Apex EX 500T/700T/900T series are CNC CMMs equipped with the PH20, 5-axis control touch-trigger probe.
• 5-axis operation reduces the time required for probe orientation movements and allows more flexible positioning. This also ensures easy access to complex work pieces and saves time both during programming and measurement.
• In addition to 3-axis point measurement similar to conventional coordinate measuring machines, the PH20 probe head also supports 'head touch' operation for quick point measurement using the two rotational axes of the probe only, with no movement required along the CMM axes.
• PH20 incorporates a TP20 probe and allows use of modules designed for the TP20. Automatic probe changeover with a module changer is also supported.
• Even without the workpiece to be measured, a measurement program can be created on a PC using 3D CAD data. Compared to joystick operation, this makes for more efficient programming and also allows interference checking

ENQUIRY
Mitutoyo HIGH ACCURACY DIGIMATIC MICROMETER

0.1µm resolution measurement
Rigid frame and high performance constant force mechanism
Measuring force 7N to 9N

ENQUIRY
Mitutoyo MCOSMOS CMM Software

MCOSMOS by Mitutoyo is a proprietary metrology suite of inter-related modules and dedicated expansion modules for the Microsoft Windows 7 operating system. Since the first deployment of GEOPAK in the 1980’s, on the MS-DOS platform; then migrated in the 1990’s to Windows NT, 2000, XP; and today, supported world-wide in 37 locations around the globe supporting 12 different languages; MCOSMOS is the world's standard in metrology software. (A proud Microsoft Gold Partner)
Developed by MiCAT (Mitutoyo Intelligent Computer Aided Technology) your Mitutoyo CMM is streamlined with intuitive user interfaces that provide a familiar look and feel to operate multiple modules. They work together seamlessly to put reliable metrology at your fingertips – for application throughout the entire production process.
MCOSMOS allows integration among a whole series of applications, improving the efficiency of your CMM and the productivity of your Quality Control functions. Specific expansion modules dedicated to GEOPAK or for specific applications such as GEAR measurement, Airfoil analysis, Reverse Engineering and integrating CAD with metrology.

ENQUIRY
365bet平台